ATEN ATEN VanCryst VM1600A, User Manual

Page: 65 / 204

Chapter 3. Front Panel Operation
51
LCD Menu
Use the Menu pushbutton to switch between the Main Screen and Menu page.
From the Main Screen press the Menu pushbutton to access the Menu page;
use the pushbuttons (1-16) to cycle through the menu options, starting from IP
Setting, in the order show in the table below:
Note:

Default settings are indicated in bold.

Upon VM1600A startup, check the front panel LCD to view the loading
progress. If the LCD Menu fails to load, an error message displays. Reset
the unit and try again.
Menu Page Sub-Menu Page(s)
IP Setting IP Address
Subnet Mask
Gateway
Serial Port Setting Baud Rate 9600 / 19200 / 38400 / 115200
Operation Mode EDID Default / Port1 / Remix / Customized
CEC On / NA
OSD On / NA
Output Status Video On / NA
Stereo Audio 01-16
Output
Resolution
01-16
Security Mode Mode None
Password Enable
Lock Screen
Change Password Old Password New Password
Play the Profile Schedule
Stop the Profile Schedule
Standby Mode
Break Output Group