Chapter 4. Operation
33
The Power Status Screen
The Top Panel
Power Sockets:
The top panel of the Power Status screen is divided into eight subareas which
correspond to the A- H outlets on the PN0108's rear panel.
Each subarea is composed of a
socket icon
that functions as the Power Button
for its corresponding outlet, and an
information panel
to its right. Clicking the
socket icon turns the power status of the computer attached to its outlet On or
Off. The icon and the label under it inform you of the power status as shown in
the following table:
Indication
Status
Steady Gray
Power to the outlet is OFF.
Flashing Gray
Power to the outlet is OFF but
Modem Ring Resume
has been
specified as the remote power option (see
, page 39, for details).
Flashing Yellow
A change in the outlet's power status is pending. See
for details.
Steady Amber
Power to the outlet is ON.
Flashing Lightbulb
Indicates that the outlet is either experiencing an overcurrent
situation, or the relay has failed. Click the icon to recover. If the
port recovers successfully, it returns to the status it was at before
it failed, and the icon changes to reflect the recovered status. If
the port cannot recover, contact Altusen technical support.
pn0108.book Page 33 Friday, December 14, 2007 4:15 PM