ATEN Altusen KN9008, User Manual

Page: 159 / 178

Appendix
145
IP Address Determination
If you are an administrator logging in over the Net for the first time, you need
to access the KN9008 / KN9016 in order to give it an IP address that users can
connect to. There are three methods to choose from. In each case, your
computer must be on the same network segment as the KN9008 / KN9016.
After you have connected and logged in you can give the KN9008 / KN9016
its fixed network address. (See
Network , page 55.)
IP Installer
For computers running Windows, an IP address can be assigned with the IP
Installer utility:
1. Unzip the contents of IPInstaller.zip (found on the Software CD that came
with your KN9008 / KN9016 package) to a directory on your hard drive.
2. Go to the directory that you unzipped the IPInstaller program to and run
IPInstaller.exe . A dialog box similar to the one below appears:
3. Select the KN9008 / KN9016 in the Device List .
Note: 1. If the list is empty, or your device doesn't appear, click
Enumerate to refresh the Device List.
2. If there is more than one device in the list, use the MAC address
to pick the one you want. The KN9008 / KN9016's MAC address
is located on its bottom panel.