ATEN ALTUSEN KH1508 User Manual Download Page 56

Page: 56 / 78

KH1508 / KH1516 User Manual

Note:

On a daisy chained installation, connect the cable to the First Station
(Master) unit. The chained stations (Slaves) will receive the upgrade
via the daisy chain cables.

4. Shut down all of the computers - but not the Stations - on your KVM

installation.

5. From your KVM switch console, bring up the OSD (see page 21) and

select the

F4ADM

function.

6. Scroll down to

FIRMWARE UPGRADE

. Press

[Enter]

, then press

[Y]

invoke Firmware Upgrade Mode. (see page 31.) For your reference, the
current firmware upgrade version displays on the screen.

Performing the Upgrade

Starting the Upgrade:

To upgrade your firmware:

1. Run the downloaded Firmware Upgrade Package file - either by double

clicking the file icon, or by opening a command line and keying in the full
path to it.

The Firmware Upgrade Utility

Welcome

screen appears:

2. Read and

Agree

to the License Agreement (enable the I Agree radio

button).

kh15816.book Page 46 Tuesday, November 27, 2007 1:05 PM

Summary of Contents for ALTUSEN KH1508















































































Search results

Summary of Contents for ALTUSEN KH1508

Reviews:

Related manuals for ALTUSEN KH1508

Brands by name

Popular brands

ATEN ALTUSEN KH1508, User Manual

Search results

Summary of Contents for ALTUSEN KH1508

Reviews:

Related manuals for ALTUSEN KH1508

Brands by name

Popular brands