ATEN Altuscan KN2124V Quick Start Manuals Download Page 1

Package Contents

1

Requirements

2-1

2-2

Requirements

1 KN2124v, KN2140v, KN4124v, KN4140v KVM Over the Net™ Switch
2 SA0142 Serial Adapters (RJ45-F to DB9-M; DTE to DCE)
2 Power Cords 
2 Utility Power Cords
1 5-in-1 Console Cable 
1 Rack Mount Kit

Hardware Installation 1

5-1

Hardware Review (Front View)

3

Hardware Review (Rear View)

4

1. Power Socket

2. Power Switch

3. Secondary LAN Port

4. PON Port

5. Grounding Terminal 

6. Primary LAN Port

7. Modem Port

8. Local Console Ports

9. KVM Ports

Rack Mounting

The KN2124v /KN2140v / KN4124v / KN4140v can be mounted in a 19" (1U) rack. The 

mounting brackets can screw into either the front or the back of the unit so that it can attach to 

the front or the back of the rack.

To mount the unit at the front of the rack, do the following:

1. Remove the two screws at the front or the rear,  as shown in the diagram below:

2. Screw the mounting brackets into the sides of the unit at the front or the rear, as shown in 

the diagram below:   

 

 

3. Slide the unit into the front or rear of the rack and secure it to the rack.

Phillips head hex

M3 x 6

Phillips head hex

M3 x 6

Phillips head hex

M3 x 8

Phillips head hex

M3 x 8

Remote User Computers

Remote user computers (also referred to as client computers) are the ones the users log into the 

switch with from remote locations over the internet. The following equipment must be installed 

on these computers:

• For best results we recommend that the computers used to access the switch have at least a P III 

1 GHz processor, with their screen resolution set to 1024 x 768.

• Browsers must support 128 bit SSL encryption.

• For best results, a network transfer speed of at least 512kbps is recommended.

• For the browser-based WinClient ActiveX Viewer, DirectX 8 must be present, and at least 

150MB of memory must be available after installation.

• For the browser-based Java Applet Viewer the latest version of Sun's Java Runtime Environ

-

ment (JRE) must be installed, and at least 205MB of memory must be available after 

installation.

• For the Windows Client AP, DirectX 8 must be present, and at least 90MB of memory must be 

available after installation.

• For the Java Client AP, the latest version of Sun's Java Runtime Environment (JRE) must be 

installed, and at least 145MB of memory must be available after installation.

• For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher driver installed.

Servers

Servers are the computers connected to the switch via KVM Adapter Cables. The following 

equipment must be installed on these servers:

• A VGA, SVGA or multisync port

• For USB KVM Adapter Cable Connections: a Type A USB port and USB host controller

• For PS/2 KVM Adapter Cable Connections: 6-pin Mini-DIN keyboard and mouse ports

Video

Only the following non-interlaced video signals are supported:

KVM Adapter Cables

• Cat 5e / 6 cable is required to connect the KN2124v / KN2140v /KN4124v / KN4140v to one of the 

KVM Adapter Cables 

• The following KVM Adapter Cables are required for use with the KN2124v / KN2140v / KN4124v / 

KN4140v 

Operating Systems

• Supported operating systems for remote user computers that log into the KN2124v /KN2140v / 

KN4124v / KN4140v include Windows 2000 and higher, and those capable of running Sun's Java 

Runtime Environment (JRE) 6, Update 3, or higher (Linux, Mac, Sun, etc.).

• Supported operating systems for servers that connected to the KN2124v /KN2140v / KN4124v / 

KN4140v are shown in the table, below:

Browsers

Supported browsers for users that log into the KN2124v / KN2140v / KN4124v/ KN4140v include the 

following:

1 Foot Pad Set (4 pcs.)

1 User Instructions

Note: The figure above shows the rear panel of a KN2140v / KN4140v with two 

blocks of 16 KVM ports and one block of 8 (40 ports in total). The 

KN2124v / KN4124v differs in that it only has a single block of 16 KVM 

ports and one bock of 8 (24 ports in total).

Resolution  

Refresh Rates 

640 x 480  

60, 70, 72, 75, 85 

720 x 400  

70, 75 

800 x 600  

56, 60, 70, 72, 75, 85 

1024 x 768  

60, 70, 75, 85  

Resolution  

Refresh Rates 

1152 x 864  

60, 70, 75, 85 

1152 x 900 

66, 76

1280 x 1024   60, 70, 75, 85 

1600 x 1200   60 

Function  

Module 

Connect to devices with PS/2 ports  

KA9120 / KA7120 

Connect to devices with USB ports 

(all platforms-PC, Mac, Sun)  

KA9170 / KA7170 

Connect to Sun Legacy Computers  

KA9130 / KA7130 

Connect to serial based devices  

KA9140 / KA7140 

Connect to devices with USB ports; virtual media support  

KA7175 

Connect to devices with USB ports, virtual media and audio support  

KA7176 

* If Safari freezes when using the Snapshot feature you 

may upgrade to Mac OS 10.4.11 and Safari 3.04. 

1. Power LED

2. Port LEDs

3. LAN LEDs

4. USB Ports

Note: The figure above shows the front panel of a KN2140v / KN4140v.  

        

  

The KN2124v / KN4124v differs in that there are fewer port LEDs.

5. Reset Switch

6. Audio Ports

7. Port Switching Buttons

1

2

3 4

7

6

5

8

9

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

1

3

2

4

5

7

6

OS

Version

W

indows 

2000 and higher 

Linux 

RedHat 

7.1 and higher 

Fedora 

Core 2 and higher 

SuSE 

9.0 and higher 

Mandriva (Mandrake) 

9.0 and higher 

UNIX 

AIX 

4.3 and higher 

FreeBSD 

4.2 and higher 

Sun 

Solaris 8 and higher 

Novell 

Netware 

5.0 and higher 

Mac 

OS 9 and higher* 

DOS 

6.2 and higher 

Browser  

Version

Internet Explorer

6 and higher  

Chrome

8.0 and higher

Firefox  

W

indows

3.5 and higher

Linux

3.0 and higher

Safari 

W

indows

4.0 and higher

Mac

3.1 and higher

Opera

10.0 and higher

Mozilla  

W

indows

1.7 and higher

SUN

1.7 and higher

Netscape  

9.0 and higher

KN2124v/KN2140v/KN4124v/KN4140v

KVM Over the NET™ Quick Start Guide

© Copyright 2012 ATEN

®

 International Co., Ltd.   www.aten.com

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd. 
All rights reserved. All other trademarks are the property of their respective owners.
This product is RoHS compliant    

PAPE-1215-100G              Printing Date: 02/2012

Patent No.

All information, documentation, and specifications contained in this media are subject to change without prior notification by the manufacturer. 
Please visit our website to find the most up to date version. 

TW 199673
TW I339467
TW I220489  

TW 203183
TW I273415
US 7142721

US 7350091
US 7585176
US 6957287 

US 7340556
US 7472217
US 7716404

JP 4558319
JP 4651633
CN ZL 02129894.7

CN ZL 02824593.8
CN ZL 200710181531.5
CN ZL 200910001638.6 

Online Registration

International:

• http://support.aten.com

North America:

• http://www.aten-usa.com/product_registration  

 

Technical Phone Support

International:

• 886-2-8692-6959

China:

• 86-10-5255-0110

Japan:

• 81-3-5615-5811

Korea:

• 82-2-467-6789

North America:

• 1-888-999-ATEN   Ext: 4988  

United Kingdom:

• 44-8-4481-58923

Reviews: