ATEN 4719264645624, User Manual, Page: 119 / 261

Chapter 8. Port Access
103
Port/Outlet Naming
For convenience – especially in large installations with many devices –
administrators and users with port configuration permission, can give each port
a name. To assign, modify or delete a name, do the following:
1. Click once on the item you want to edit; wait a second; then click again.
Note: 1. This is not a double-click. It involves two separate clicks. A
double-click will switch you to the device attached to the port.
2. In the AP GUI version you can right-click on the port you want to
edit, then select Rename in the popup box that appears, or you
can highlight the port and press F2 .
After a second or two, the field changes to provide a text input box:
2. Key in a name for the item (or change/delete a previous one).
Š
You can use any combination of letters, numbers, and symbols on the
keys of keyboards with a PC US English layout. In this case, the
maximum number of characters allowed is 20.
Š
You can also activate your local IME to input non-English characters.
For languages that use 2 bit encoding, the maximum number of
characters allowed is 9.