CM5000 User Manual
UM-CM5000-FW3.5.2.0-REV0.0
2019-07-08
www.ateme.com
Page 71
Preset
Slot 1 .. Slot 128
-
[enable] tickbox to enable/disable the automation functionality.
[Add rule] button to create an automation rule.
When enabled the automation functionality will look for a rule matching the SDI input video format and then will
load its corresponding channel preset.
Note
Channel auto sense and system automation are different functionalities. Auto sense will follow the SDI
input video format and modify the preset as little as necessary to encode the new input video format
(e.g. the audio and data ES will not be impacted). Automation will load a new channel preset following
the SDI input video format change.
5.3.8. System - Assets
Table 5.48. Assets
Parameter
Value
Note
File Name
-
-
Size
-
-
Delete
-
-
[Add asset] button opens a browser to select a file to upload.
Logos
Warning
Only BMP and TGA, 24 and 32-bit files are supported.
Warning
Logo width must be a multiple of 4 pixels.
Warning
Logo height must be a multiple of 2 pixels.
When used as a logo on the video, the maximum resolution is 256x256 pixels. The alpha channel if present (32-bit
files) is used to do the transparency, otherwise the logo will be fully opaque.
When used as a custom emulation pattern, the maximum resolution is 1920x1080 pixels. The alpha channel if present
(32-bit files) is ignored.
