RCS 3/T
ROUND METAL CEILING LOUDSPEAKER MINIATURE
Page 1/2
The RCS range of ceiling loudspeakers have been carefully
designed to blend seamlessly in to any installation. These units are
stylish yet unobtrusive.
Made from a pressed steel epoxy coated chassis incorporating
a twin cone driver, which offers a wider frequency response
than a standard single cone, this gives the RCS range a superior
performance. Designed to make installation quick and easy
and suitable for use in applications where background music
and speech are the primary requirement such as shops, schools,
restaurants, hotels, public houses, offices etc.
RCS3T_datasheet_AE_en_vn1.0_web
Electrical
Rated power, Watts
6
Tappings 100 volt line, Watts
6/4/2
Transformer Impedance, Ohms 100V
1.67k/2.5k/5k
Tappings 70.7 volt line, Watts
3/2/1
Driver impedance, Ohms
8
Effective Frequency Range, Hz (BSEN60268-5)
100-20.000
S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10 kHz
87
S.P.L. @ Full power Octave Bandwidth, dB
94
Acoustic Power (dB-PWL@1 watt) 1 k/2kHz, dB
83/85
Dispersion at 1k/2kHz, Degrees
180/180
Directivity Axial Q factor, 1 k/2kHz
2.0/2.4
Environmental
IP Rating
21
Min/Max amb temp
-25°C to 70°C
Relative Humidity
≤60%
Mechanical
Dimensions, diameter, mm
Ø104.5
Net weight, kg
0.49
Colour/Finish
White RAL9016
Material
Steel
Mounting
Twin Spring
Cut-out, mm
Ø85
ATEÏS Europe B.V.
Celsiusstraat 1, 2652 XN Lansingerland, Netherlands
Phone +31 (0)10 208 86 90, www.ateis-europe.com, [email protected]
