IDA8 Global-Net User Manual
458
© 2017, ATEÏS, member of PAX ProAV Group
(Contact Mode).
o
Contact Without Monitor: The logic output
component triggered by opening/closing the
connector of +/- Pin on rear panel without
detection/monitoring.
Response Time: Determine how quick the system
responds to the hardware status changing from
Open(Lo) to Close(Hi) or from Close(Hi) to Open
(Lo).
Activation: This parameter to determine under
what condition the hardware will generate 1
output. There are two choices:
o
Open(Lo): The component output=1 when the
contact open(contact mode) or voltage low
(voltage mode).
o
Close(Hi): The component output=1 when the
contact close(contact mode) or voltage hi
(voltage mode).
5.13.9 URGP 16I16O
This component corresponds to URGP peripheral devices, which offers more logic input channels of
audio processor.
Input Pins: When the Input Pin is high, the Evacuation Output channel on URGP 16I16O will output
5VDC.
Output Pins: The input status of Evacuation Input channel on URGP 16I16O.
Fault Pins: The fault status of Fault Input channel on URGP 16I16O.
