IDA8 Global-Net User Manual
354
© 2017, ATEÏS, member of PAX ProAV Group
Remove: Remove the element controlled by the event.
This action only removes the relation between the element and event and does not delete the
element.
Clear: Remove all elements controlled by the event.
4.3.5
Step Trigger
This event is used for controlling the element value. It will adjust the element value by steps when the
source triggers the event. There are multiple states in triggered event, each state contains a step value.
Click [Add] to create a new event, and a pop-up setting
window will be displayed, here you can choose which
kinds of event users acquired. Select [Step Trigger] option
on [Type] drop-down box, then press [OK].
Event Settings
After creating a Step Trigger event, users need
to assign an element to it.
1. Right click the desired element, and click
the options [Event > Step Trigger > XXX]
which XXX is the name of the event. See the
picture on the right.
2. Then there will be a window which displays
the event information corresponded to
trigger step. Tick the checkbox on [Select]
grid.
