IDA8 Global-Net User Manual
352
© 2017, ATEÏS, member of PAX ProAV Group
number to a value and then sets it to the element.
Remove: Remove the element controlled by the event.
This action only removes the relation between the element and event and does not delete the
element.
Clear: Remove all elements controlled by the event.
4.3.3
Value Control
This event is used for controlling the element value for triggering the event.
Click [Add] to create a new event, and a pop-up setting
window will be displayed, here you can choose which
kinds of event users acquired. Select [Value Control]
option on [Type] drop-down box, then press [OK].
Event Settings
After creating a Value Control event, users
need to assign an element to it.
1. Right click the desired element, and click
the options [Event > Value Control > XXX]
which XXX is the name of the event. See the
picture on the right.
2. Click [Content...] button on Event Manager
window to open the settings window of
event.
3. On the right side of window, there is a knob to simulate the source that triggers the event. The value
of elements will also be changed if adjusting the knob.
Control Type: This control option determines the type of knob simulation.
Value: Adjust the value of elements by native value.
Percent: Adjust the value of elements by percentage.
Element: The element of the component controlled by value trigger.
Component: The component of device contains the previously element.
Device/System: The device/system contains the previously component.
Max/Min: The maximum/minimum value of the simulating knob.
Remove: Remove the element controlled by the event.
