32
© 2019, ATEÏS, member of PAX ProAV Group
recording, message routing, message play, level control etc..
All paging functions and parameters for site operation such as naming zone buttons, zone group
buttons, zone paging, pre/post chime settings can be pre-programmed via web browser. Moreover,
several user levels with password protection make the CD-T5DF a versatile console that fits well in a
commercial shopping centre or an industrial high-security facility.
Up to 8 CD-T5DF can be connected to a remote port of BTQ-VM/SG/SL via daisy-chain and up to 16
in redundant loop. The maximum communication cable length between the BTQ-VM/SG/SL and
remote units is 250m (820 ft.) via STP CAT5/6 cable with shielded RJ45 connector.
2.5.4.1
Front panel
1. Fireman microphone & U-shape bracket:
A fully monitored microphone is designed for EVAC paging. The paging button supports both
press to talk and lock to talk mode. The talk mode can be set via web browser.
2. Monitoring speaker:
This built-in speaker is to monitor the zone audio including message and BGM. When a fault is
detected in the system, it will generate a buzzer sound (tone) as warning.
3. Evacuation button:
Once this button is pushed, the system will enter to emergency state. The red LED will light up
and play/route the EVAC messages.
4. Touch screen panel:
A 5'' LCD touch screen, and each pages on the panel can be pre-programmed to zone paging,
trigger events etc..
Please read
DPM-T5/DPM-T5F/CD-T5DF LCD panel
5. EVAC LED:
This LED lights up in red when system is under the evacuation paging.
6. Fault LED:
This LED lights up in yellow when one or more system faults are detected.
7. Power LED:
This LED lights up in green when CD-T5DF is powered.
