134
© 2019, ATEÏS, member of PAX ProAV Group
3. An new event will be created
and displayed as the picture
above.
Zone selection
All the events which relate to paging have the identical zone setting, this setting informs the
BOUTIQUE system that which zones will be distributed audio when proceeds a paging.
Device: The device name (main controller or secondary units).
Zone: Tick the zones checkbox to select them into pre-define zones. As soon as a call in non
pre-defined zone is finished, the next call will be automatically rerouted in the pre-defined
zone.
o
All: Select all the zones of main controller and/or secondary unit.
1-8: Allow to select zone 1 to 8 independently from a main controller and/or secondary unit.
Logic out: Select the logic output(s) to be triggered when the pre-define zone is triggered.
5.1.10.3 Logic out
BOUTIQUE has 8 output channels that can be configured with 4 modes.
Event name: The name of this event.
Mode (cycle is from OPEN to CLOSE):
o
OPEN: The contact output's channel is open when the event is triggered.
o
CLOSE: The contact output's channel is close when the event is triggered.
o
TOGGLE: Trigger the event contact output's channel relay switch between open and
close.
o
PULSE: The contact is close during the [Close] period then open during [Open] period.
Close period (ms): Set the time to close the contact output's channel.
Open period (ms): Set the time to open the contact output's channel.
