Configuration
119
© 2019, ATEÏS, member of PAX ProAV Group
denied.
The available zones means the selected paging zones are not occupied by other sources or
not occupied by other sources with lower priority.
Refresh: Enable this option to let the paging source takes back the zones from the occupied
zones when their paging event has finished.
ID1: Select which main controller/secondary unit is working with this [Singular Type] paging.
Line out: Select to use which [Audio Line out] on main controller to monitor the sound by
using external device such as earphone, speaker etc. when this paging event is triggered.
Message event: Select the audio message or a message event. The message event can be
created from
Pre-chime/post-chime: Add a chime message at the beginning of a mic/MSG TEST/alert/evac/
fireman paging and also at the end of the call.
Pre-chime/post chime level: The level of pre-chime/post-chime message.
Zone: By ticking the pre-defined zones in which the paging call will be made.
o
All: Select all the zones of main controller and/or secondary unit.
o
1-8: Allow to select zone 1 to 8 independently from a main controller and/or secondary
unit.
2. Logic: Select the logic output(s) to be triggered when the corresponded zone is triggered.
3. Click [Save] to save the settings, and click [Cancel] to annul the current settings.
5.1.8.3.1.1 MSG TEST/ALERT/EVAC
Configure the paging event of MSG TEST/ALERT/EVAC is identical to a Singular type of paging
event, see
5.1.8.3.1.2 FIREMAN
Talk mode: Select the talk behavior.
o
Press to talk: Talk only while pushing the microphone button.
o
Lock to talk: Talk after pushing the microphone button one time and stop talking by
pushing the microphone button again.
The fireman microphone have been designed for emergency paging, please double check
when changing its priority and security settings. The default talk mode of the fireman
