OR
OR
Plastic Anchor
(x2)
Self-Tapping
Screw
(x2)
Hardware
Drywall Anchor
(x4)
M4x10mm
(x4)
M4x16mm
(x4)
8mm (
5⁄16
") Hole
10mm (
⅜
") Hole
4mm (
3⁄16
") Hole
Timber Stud
M5x10mm
(x2)
Component Checklist
Wall
Plate
Display
Plate
IMPORTANT INFORMATION
Step 1. Check Components
Check you have received all parts against the Component Checklist and Hardware shown above.
Step 2. Mounting the Wall Plate
Tip: Use a spirit level to ensure wall plate is horizontal
Masonry Wall
Drywall
Timber Stud
Display Mounting Screws
M5x14mm
(x4)
5mm washer
(x4)
TH-1026-VF
Flat Screen Wall Mount | Fixed
Tools Required:
• Power Drill
• Phillips Head screwdriver
• 8mm (
5⁄16
) masonry drill bit
• 10mm (
⅜
) drill bit
• 4mm (
3⁄16
) drill bit
• Spirit Level
! IMPORTANT - Install TH-1026-VF as per Installation Instructions.
! This product supports a maximum load of 30kg (66lbs). Maximum supported screen size is 27".
! This product only supports VESA compliant displays with 75mmx75mm (3"x3") and 100mmx100mm
(4"x4") mounting hole patterns. The product can be mounted on any device with these hole patterns,
but please check device manufacturer’s specification to ensure safety.
! The manufacturer does not accept responsibility for incorrect installation.
Installation Instructions
