AWM-BT Page 1 of 3
Installation Guide
AWM-BT
AWM Tilt Bracket
COMPONENT CHECKLIST
REQUIRED TOOLS
WEIGHT RANGE
Flat Monitor
4.5 - 25kg (10 - 55lb)
Curved Monitor
4.5 - 18kg (10 - 40lb)
Display Size
24” - 55”
• Phillips Head Screwdriver
IMPORTANT INFORMATION
! Please ensure this product is installed as per these installation instructions.
! Each Tilt Bracket supports a maximum weight as per above capacity specification.
! This product is not suitable for outdoor use.
! Do not use this product for mobile applications.
!
The manufacturer accepts no responsibility for incorrect installation.
!
This product is compatible with Atdec AWM Series products.
! VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA locations exert additional
leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range.
Please contact Atdec if you would like further information.
B
Bracket
(x1)
A
VESA Plate
(x1)
C
M4x10
Screw
(x4)
D
M4x20
Screw
(x4)
E
10mm
Spacer
(4x)
F
4mm
Hex Key
(x1)
300mm (12”) max
overall display depth
