background image

Installation Guide 

AD-TVC-70A

AD-TVC-70A  Page 1 of 8

AV Cart 70

COMPONENT CHECKLIST

REQUIRED TOOLS

•  Phillips Head 

Screwdriver

DISPLAY SIZE

40” - 70”

DISPLAY WEIGHT

0 - 70kg 
(0 - 154lbs)

SHELF WEIGHT

0 - 5kg
(0 - 11lbs)

CAPACITY

IMPORTANT INFORMATION

!  Please ensure this product is installed as per these installation instructions. 

!  The manufacturer accepts no responsibility for incorrect installation.
!  Failure to assemble this product correctly may cause serious injury/death during or following installation.
!  This product should only be installed by professional installers of good mechanical aptitude, who fully understand these instructions and the
     consequences of incorrect installation. 
!  Do not over tighten screws.
!  Two person installation is recommended.
!  Product not suitable for use outdoors.
!  After installation is complete check to verify that AV Cart is secure and safe for use.
!  Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA  
 

locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range.  

 

Please contact Atdec if you would like further information.

WARNING!

 Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on

 

the cart may encourage a child to climb on the cart and as a result the cart may tip over on to the child.

Summary of Contents for AD-TVC-70A









Reviews: