ATD Tools Atd-7404 Operating Instructions & Parts Manual Download Page 8

ONE YEAR LIMITED WARRANTY

 

For a period of one (1) year from date of purchase, 

ATD Tools Inc.

 will repair or replace, at its option, without 

charge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited 

warranty is a consumer's exclusive remedy.

 

Performance of any obligation under this warranty may be obtained by returning the warranted product, 

freight prepaid, to 

ATD Tools Inc. 

Warranty Service Department, 160 Enterprise Drive, Wentzville, MO 63385.

 

Except  where  such  limitations  and  exclusions  are  specifically  prohibited  by  applicable  law,  (1)  THE 

CONSUMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE 

PRODUCTS AS DESCRIBED ABOVE. (2)

 ATD Tools Inc.

 SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL 

OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT 

LIMITATION  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY AND  FITNESS  FOR A  PARTICULAR 

PURPOSE, SHALL BE LIMITED TO ONE YEAR,  OTHERWISE  THE REPAIR, REPLACEMENT OR REFUND AS 

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, 

AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, 

ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND 

IS NOT COVERED BY THIS WARRANTY.

 

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not 

apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the 

above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also 

have other rights which vary from state to state.

Atd Tools Inc.

160 Enterprise Drive, 

Wentzville MO 63385

636-327-9050

 

8

Summary of Contents for Atd-7404









Reviews: