Replacing the Mandrel
1. Use the wrench to loosen the nosepiece.
2. Use the wrench to loosen and remove sleeve.
4. Choose correct mandrel and press the sheath,
screw mandrel clockwise until tight, then
release the sheath.
5. Screw and tighten sleeve and corresponding
nosepiece back on.
Troubleshooting
Note: If the riveting process isn’t
done correctly, the riveter won't be
easily extracted from the workpiece.
If you pull the riveter forcefully, you
will damage the unit or the work-
piece.
Corrective action: Insert hex key or
similar tool (< 5mm) into the lock
hole as shown in Figure 1, rotate
rotary knob and then the riveter can
be released from the workpiece as
shown in Figure 2.
Figure 1
Figure 2
Lock Hole ( 5mm)
You can choose other
similar tools as long as
they can be Inserted into
hole.
3. Press the sheath, pull and turn mandrel
counterclockwise and remove
mandrel
