SAVE THESE SAFETY INSTRUCTIONS
II. General safety rules ... continued
4
17. CHECK FOR DAMAGED PARTS. Check moving parts for alignment, jamming, breakage,
improper mounting, or any other conditions that may affect the tool's operation. Any part
that is damaged should be properly repaired or replaced before use.
18. MAKE WORKSHOP CHILDPROOF. Use padlocks, master switches, and always remove
starter keys.
19. DO NOT operate tool if you are under the influence of drugs, alcohol or medication that
could affect your ability to use the tool properly.
20. WHEN SERVICING USE ONLY IDENTICAL REPLACEMENT PARTS. Double insulation
does not take the place of normal safety precautions when operating this tool.
LASER SAFETY
The laser light beam used in this system is Class III with a maximum
≤
5 mW and
640–660 nm wavelength.
WARNING:
DO NOT STARE DIRECTLY AT THE LASER BEAM! A HAZARD MAY EXIST
IF YOU DELIBERATELY STARE INTO THE BEAM
.
PLEASE OBSERVE ALLSAFETY
RULES AS FOLLOWS:
• THE LASER SHALL BE USED AND MAINTAINED IN ACCORDANCE WITH THE
MANUFACTURER'S INSTRUCTIONS.
• NEVER AIM THE BEAM AT ANY PERSON OR AN OBJECT OTHER THAN THE
WORKPIECE.
• DO NOT PROJECT THE LASER BEAM INTO THE EYES OF OTHERS.
• ALWAYS ENSURE THE LASER BEAM IS AIMED AT A WORKPIECE WITHOUT
REFLECTIVE SURFACES AS THE LASER BEAM COULD BE PROJECTED INTO
YOUR EYES OR THE EYES OF OTHERS.
ALWAYS WEAR EYE PROTECTION.
A cut-off saw can throw foreign objects into your eyes which
could cause permanent eye damage.
ALWAYS wear safety goggles (not glasses). Ordinary eyeglasses
have only impact-resistant lenses...they ARE NOT safety
goggles.
WARNING: DUST GENERATED FROM CERTAIN MATERIALS CAN BE HAZARDOUS TO
YOUR HEALTH. ALWAYS OPERATE THE CUT-OFF SAW IN A WELL-VENTILATED AREA.
USE DUST COLLECTION SYSTEMS WHENEVER POSSIBLE. USE A FACE MASK OR
DUST MASK WHEN OPERATING THE CUT-OFF SAW.
