Rainbow4(S) IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.com.cn
17
The input audio will be not transmitted to peer phone after pressing
key,
and the phone will be muted even switched among different modes of speaker,
handset and headset. To un-mute, just press
key again.
2.8
、
3-Way Conference
1. While on calling, press the soft key “
Conf
”, input the 3
rd
party’s phone number
and then press the softkey “
Dial
” or press the soft key “
Conf
” and press the
corresponding BLF key to invite the 3
rd
party to join a conference call.
2. After the third party answers the call, pressing "
Conf
" key again to establish
the 3-way conference
3. The initiator of 3-way conference can press the soft key "
Hold
" to hold the
conversation with other two parties, and press “
Resume
” to back to 3-way
conference.
4. If the initiator hangs up the call or press the soft key “
End Conf
”, the
conference will be ended and the calling between the other two parties will be
hung up as well.
5. The initiator of 3-way conference can press the soft key "
Split
" to separate the
conference call, and the calling between initiator and the other two parties are
still active but under the status of Call hold.
6. After split the 3-way conference, press the soft key “
More
” and then press the
softkey “
Join
” to resume the 3-way conference or press the softkey “
Conf
“ to
setup a new 3-way conference call.
2.9
、
Hang up the phone
1. Softkey hang up
While on calling, press the softkey “
End Call
” to hang up.
2. Handset hang up
Put back the handset at handset mode, the current calling will be hung up.
3. Speaker hang up
Press
key at speaker model, the current calling will be hung up.
4. Headset Hang up
Press
key at headset model, the current calling will be hung up.
5. Hang up one line call
