ATC OVERDOOR HEATER
INSTALLATION, OPERATION & MAINTENANCE MANUAL
Thank you for purchasing this ATC WEL3000 3kw Overdoor Heater.
Please read these instructions carefully before use
Specifications
Dimensions (LxWxH) mm
618 x 139 x 221
Voltage (V ~)
220-240
Frequency (Hz)
50
Motor Power (w)
High
40
Low
15
Heating Power (kW)
High
3
Low
1.5
Air Volume (m
3
/h)
High
240
Low
120
Air Speed (m/s)
4 (max)
Settings
Off/Ambient/1500w/3000w
External control
Yes – 5v DC contact
Temp Rise
(Δt°C)
30-50
Noise level (dB)
40±3 db @1.5m
Weight (Kg)
6.8
Insulation Class
1
Ingress Protection
IP20
Approvals
CE
Precautions for Installation
•
Operating conditions for the WEL3000 overdoor heater: Installation below 1000m altitude; Operating temperature is between -10
°C
and +40
℃
; Relative humidity of
≤90
%. Indoor use only
•
This overdoor heater must be mounted in a solid structurally sound location to prevent excessive vibration.
•
This overdoor heater is not suitable for use in locations with high temperatures, high humidity, explosive atmospheres, corrosive
substances or any other location where gases or fine powder is present in the air. This may damage internal components or insulation
•
This heater must not be recessed into ceilings or be built into bulkheads.
•
Do not touch the outlets of the overdoor heater when it is running as they may be hot and could possibly cause burns.
•
Do not obstruct either the inlet or outlet of the overdoor heater.
•
Clean all the dust from the heater every month to ensure smooth operation.
