40
•
Protocol
: Select
ALL
,
TCP+UDP
,
TCP
,
UDP
, or
ICMP
as the traffic types to be
filtered .
•
Source ports
: Enter the ports number that traffic will be filtered from .
•
Destination ports
: Enter the ports number to which traffic will be filtered .
•
Action
: Select
Drop
,
Accept
, or
Reject
to deny or allow the access to the
Internet .
When finished, click the
SAVE & APPLY
button .
Existing rules can be further edited by clicking the
EDIT
button to the end of
each rule entry .
You can also set the priority for the existing rules by clicking
Up
and
Down
icons .
VPN passthrough
This feature allows VPN client software on connected devices to connect
through this device to remote VPN servers . You can specify the VPNs allowed by
protocol .
Under normal operation, these should be left as
Enabled
.
