AT&T TL7910 Quick Start Manual Download Page 2

1

Introduction

The TL7910 is a cordless headset and base that allows you to 

have handsfree phone conversations. It can be used in different 

ways depending on your needs. Choose from the following three 

options. Connect your TL7910:

To a telephone line only

 (page 8). Connect the headset 

to a telephone wall jack. Use the telephones on the same 

telephone line to make or answer calls. The headset is a 

supplementary device that can join the calls.

To a traditional corded telephone

 (pages 9-10). Connect the 

headset to a corded telephone. If you also install a lifter (AT&T 

TL7100, purchased separately) on your corded telephone, 

you can use the headset to remotely control the lifter for 

answering or hanging up a call.

To both a PC and telephone line

 (pages 11-13). Connect a  

phone line to the headset base and the USB cable to your 

PC. You can make and answer VoIP calls through Skype

TM

 or 

Microsoft Lync , or landline calls using the 

AT&T Softphone 

Call Manager

. You can also use the voice command feature 

to call the desired number after you installed the 

AT&T 

Softphone Call Manager

.

Install the 

AT&T Softphone Call Manager

 using the  

CD-ROM

 provided in the package. You may also visit  

www.telephones.att.com/downloads

 to download 

the software. Unzip and install the file after download.
For installation and operation instructions of the software, refer 

to the 

Installation and Operation Guide

 which can also be 

found in the 

CD-ROM

 provided or the web site stated above. 

This quick start guide provides you with the basic installation and 

setup instructions.
You may refer to the user's manual provided in the product package 

for complete installation and operation instructions, or you can visit 

www.telephones.att.com/manuals

 

to download the manual.

For customer service or product information, visit our website at

  

www.telephones.att.com 

or call

 

1 (800) 222-3111

.  

In Canada, dial

 

1 (866) 288-4268

.

The Skype name is a trademark of Skype.
Microsoft Lync is a registered trademark of Microsoft Corporation.

Summary of Contents for TL7910
























Reviews: