AT&T Syn248 SB35020 Installation And Configuration Manual Download Page 8

Page: 8 / 116

Syn248 Installation and Configuration Guide

Back to Contents

Installation

System Overview

AT&T SB35010 Analog Gateway

— Each Gateway

provides access to up to four analog outside
telephone lines.

AT&T SB35020 Deskset

— A Deskset with a

standard screen and Programmable Feature Keys. A system can have
up to 24 Desksets.

Web User Interface (WebUI)

— The WebUI

provides the ability to customize your system for
your business from a PC that is on the same Local
Area Network. The WebUI resides on the
Gateways and Desksets, and is updated with
device software updates. See

“Updating Devices”

on page 62

Software Version Compatibility

Systems with software versions 1.0 and later support the features described in this guide.

All Gateways and Desksets must have compatible software versions installed.



To determine the software version of a SB35010 Gateway from the device front
panel, from idle, press

SELECT

, and then

DOWN

. The software version

appears.



To determine the SB35020 Deskset software version, press

MENU

, then

, and then



until

Software Ver

appears.



To determine the software version of all installed devices, log in as administrator. See

“Logging in to the WebUI” on page 27

. Then click

to see the

software versions and other information. There may be a delay as the system gathers
this information.

The Syn248 System can be expanded to support two Gateways and up to eight
lines. For more information, see

“Appendix A: Expanding Your System” on

page 103

Device Info

SW Ver:

FW Ver: Z003
S-Series:

Summary of Contents for Syn248 SB35020





















































































































Search results

Summary of Contents for Syn248 SB35020

Reviews:

Related manuals for Syn248 SB35020

Brands by name

Popular brands

AT&T Syn248 SB35020, Installation And Configuration Manual

Search results

Summary of Contents for Syn248 SB35020

Reviews:

Related manuals for Syn248 SB35020

Brands by name

Popular brands