AT&T Syn248 SB35020, Installation And Configuration Manual

Page: 36 / 116

Syn248 Installation and Configuration Guide Back to Contents
System Configuration 35
5. Set the dial key values. Program an action for each digit as needed by selecting the
action from each digit’s drop-down list.
The available choices are:

None
— No action.

Replay
— Replays the current message.

Auto Attendant Directory
— Accesses the Auto Attendant Directory, which
allows callers to spell a name, followed by the pound (#) sign. See “Name
Recording for the Auto Attendant Directory” on page 38 and “Extension Basic
Settings” on page 47 ..

<Extensions> — Sends calls directly to a specific extension.

<Personal Voicemail> — Sends call directly to a specific extension’s personal
voicemail.
6. When you are done, click to save these settings or click to refresh the
screen without saving the changes.
If no digit keys have been pressed five seconds after the voice prompt, the
voice prompt replays. After replaying the voice prompt three times, the Auto
Attendant says “Goodbye” and hangs up the call.
If the caller hangs up the phone, the Auto Attendant stops.