AT&T Partner Plus, Installation And Programming Manual, Page: 49 / 87

Night Service Group
Code: #504
Description: Identifies the extensions in the Night Service Group. When Night
Service is on and a call comes in, all extensions in the Night Service Group ring
immediately. In addition, restricted Night Service (when the system has a pass-
word) limits the Night Service Group extensions to dialing only numbers on the
Emergency Phone Number List (#403) and Marked System Speed Dial Numbers
(p. 3-34).
Valid Entries:
✓
1
=
Extension is in the group
2 = Extension is not in the group
Considerations:
■
Do not include hotline extensions in the Night Service Group.
■
If you program a System Password (#403) as well as Night Service (#503),
extensions in the Night Service Group will not be able to make outside calls
(other than Emergency Numbers and marked System Speed Dial Numbers)
without first entering the password. The system is programmed at the fac-
tory with all extensions in the Night Service Group. Therefore, remove any
extensions from the Night Service Group that should be allowed to make out-
side calls at night, unless of course the person at that extension knows the
password.
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 4 ] . The
display reads:
NS Group
Extension:
2. Enter the extension to be programmed. For example, to program
extension 13, press [ 1 ] [ 3 ] . The display reads:
NS Group 13
1 Assigned
3. To remove the extension from the group, press [ Next Data ] until the
display reads:
NS Group 13
2 Not Assigned
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number
shows on the display. Repeat step 3.
3-28 System Prograrnming