AT&T Partner Plus, Installation And Programming Manual, Page: 39 / 87

Outgoing Call
Code: #401
Restrictions
Description: Restricts the types of calls an extension can make. An extension
can be restricted to inside calling only, or to local and inside calling. Outgoing
While procedures that restrict
Call Restrictions apply to all lines assigned to the extension. The System Pass-
dialing are very effective, abso-
lute protection against misuse
word (#403), Emergency Phone Number List (#406), Disallowed and Allowed
cannot be guaranteed.
Phone Number Lists (#404 and #407) override Outgoing Call Restrictions.
PARTNER phones give you more
Valid Entries:
✓
1 =
protection against such misuse
than standard phones. There-
2 =
fore, we strongly recommend that
3 =
you install PARTNER phones
where restricting phone use is
important.
Programming Steps:
See appendix B for a complete
summary of dialing restrictions.
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 4 ] [ 0 ] [ 1 ]. The
display reads:
No restriction (can make toll, local, and inside calls)
Inside only (can make inside calls only)
Local only (can make local outside and inside
calls only)
Call Restrict
Extension:
2.
Enter the extension to be programmed. For example, to select extension
30, press [ 3 ] [ 0 ] . The display reads:
Call Restrict 30
1 No Restriction
3. To change the type of call restriction, enter the appropriate setting number
as listed above. For example, to restrict this extension to local and inter-
com calling, press [ 3 ] . The display reads:
Call Restrict 30
3 Local Only
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number
shows on the display. Repeat step 4.
3-18 System Programming