manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 78

Maintenance

Your PARTNER system is designed to provide trouble-free performance without
any special maintenance procedures. However, there are a few precautions
you can take to prevent accidental damage to your system.

206 Modules

To prevent damage to the 206 modules:

■

■

■

■

Keep the modules in an area free of dust, smoke, and moisture.

Do not block the air vents by placing objects on top of the modules.

Place the modules in a place with a temperature between 32 degrees and
104 degrees Fahrenheit.

Do not place the modules in direct sunlight.

WARNING: 

There are no user-serviceable parts inside the modules or

module connector. Hazardous voltages within. DO NOT OPEN!

Telephones

■

■

■

To prevent damage to telephones:

Do not place your telephones near a heating duct, radiator, or other heat
source.

Do not drop your telephones or expose them to excessive shock or vibration.

Unplug the telephone if:

■

Its cord is damaged

■

Liquid is spilled into it

■

Its housing becomes cracked or otherwise damaged.

To clean your telephone, wipe the outside housing with a soft, dust-free cloth. If
absolutely necessary, you may clean it with a soft cloth slightly dampened with a

mild soap and water solution. Dry quickly with a soft cloth.

CAUTION: 

Your telephone contains sensitive electronic parts. Never

submerge it in any kind of liquid, and never use detergents, alcohols,
solvents, abrasive cleaners, or an excessive amount of water when
cleaning the housing and faceplate. To do so could result in irreparable
damage.

Maintenance and Customer Support  

8-1

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands