manualshive.com logo in svg

AT&T Partner MLS 6, Installation And Use Manual

Share
Download
AT&T Partner MLS 6 Installation And Use Manual Download Page 75

Standard Phone Rings After Intercom Call with No One at Other End

Possible Cause

Do This

If...

Then:

Automatic Line

If one of the phones is a

The problem is not solved,

Call 1 800 628-2888

Selection is set

standard telephone, set its

incorrectly.

extension’s Automatic Line
Selection to "Intercom
first." See p. 3-3.

Combination Extension Problem: Phone or Device Does Not Ring Properly

Possible Cause

Do This

If...

Then:

1. Extension over-

Check to see that the total

The ringer functions prop-

Problem is with optional

loaded by more

Ringer Equivalence

erly,

device. System is okay.

ringers than it can

Numbers (REN) does not

handle.

exceed 2. (For details,
see p. 1-3.) If it does

Trouble still appears,

Go to Possible Cause 2.

exceed 2, unplug the extra
device.

2. Optional device

Remove the optional dev-

The ringer functions prop-

Problem is solved.

(fax, answering

ice from the extension.

erly,

machine, etc.) is

Trouble still appears,

Problem is with 206

faulty.

module.
Call 1 800 628-2888.

PARTNER Phone Does Not Work When Standard Phone Lifts Handset

This problem relates to combination extensions that have a PARTNER phone and a standard phone.

Possible Cause

Do This

If...

Then:

Wrong cord and

First, unplug the bridging

The PARTNER phone

Either the cord or the

wrong bridging

adapter from the wall jack.

works properly,

adapter must be replaced.

adapter used to con-

Then, unplug the

Call 1 800 628-2888 for

nect standard phone.

PARTNER phone from the

details.

adapter and plug it into
the wall jack.

Troubleshooting  

7-7

Summary of Contents for Partner MLS 6































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands