AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual Download

Page: 155 / 287

Issue 2 April 1996

7-7

Serial I/O Cards
Equinox SST

Equinox SST

When to use

Use this section to install the Equinox SST device driver.

Materials
needed

■

Root permission

■

The Equinox SST installation diskette

■

The Equinox SST installation guide

Installation
guidelines

Before your begin the installation, make sure your hardware is:

■

UnixWare 2.01 compatible

■

Installed, with all connections securely in place

Procedure

Start at the UNIX prompt.

Step

Action

Log into the Proxy Agent as root.

Insert the installation diskette.

Enter the following command:

pkgadd -d diskette1

Answer the screen prompts until the installation is
complete. (We recommend that you use the system
defaults.)

Hint: If you need help, refer to your Equinox installation
guide.

Summary of Contents for OneVision DEFINITY G3 Guide
































































































































































































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Guide

Reviews:

Related manuals for OneVision DEFINITY G3 Guide

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Guide

Reviews:

Related manuals for OneVision DEFINITY G3 Guide

Brands by name

Popular brands