AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual, Page: 145 / 287

Issue 2 April 1996
6-31
Connectivity
To Administer the Proxy Agent
Procedure 1:
Change the
customer ID Use the following steps to change the Customer ID. These steps
assume that the customer ID was added to the Proxy Agent
during installation. To begin, log in to the Proxy Agent.
Step Action
1 At the G3-MA Main Menu, enter the following:
customer-release
Result: The (CUST RELEASE) menu displays.
2 Enter the following command:
change id
Result: The Change Customer ID screen displays.
3 Press
Ctrl-n
to go to page 2.
4 Follow the normal procedure for adding a PBX to the
Proxy Agent, with the following exception:
In the appropriate DIAL STRING field, type the
following:
/dev/ttyxxx
xxx = the name of the tty device. The name you enter
in the DIAL STRING field must match the tty device
name that you entered in the Devices file.
5 Repeat step 4 for each additional PBX.