AT&T OneVision DEFINITY G3 Guide, Installation And Connection Manual

Page: 127 / 287

Issue 2 April 1996
6-13
Connectivity
To Program PBX Ports
Procedure 3:
Voice and
data Use the following steps to program a 7400B data module that
carries voice and data. You may have to use modem pooling.
Step Action
1 Enter the following command:
add station
2 Enter an analog station type in the Type field.
Example:
7101
3 Enter the analog port location in the Port field.
End
Step Action
1 Enter the following command:
add station
2 Complete the following fields.
At this field … Enter this …
Type A digital station that supports a
data module.
Example:
7407D
Port The digital port location
Data module
y
Data Ext The data module extension
End