AT&T OneVision DEFINITY G3 Fault Management and integration User Manual Download Page 73

Page: 73 / 153

The Configuration Map

4-30

Issue 2 April 1996

External Devices

An external device can be anything that is connected to a PBX. Examples of an
external device are a thermostat and a voice mail system.

The External Devices View displays icons for all the administered external
devices on a DEFINITY G3 PBX. You can click on an icon to display information
about a device’s hardware status and configuration.

NOTE:

The icon for external devices only displays on the Switch View if an external
device is administered on the PBX.

The External Devices View has the following components:

■

Menu Bar for External Devices

■

Screen Heading for External Devices

■

Alarms for External Devices

■

External Device Hotspots

■

External Device Messages

How to Open External Devices

To open the External Devices View:

1. Display the Switch View.

2. Click on the external devices icon.

Sample External Devices Screen

The following figure shows the External Devices View:

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration


























































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Fault Management and integration, User Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands