AT&T OneVision DEFINITY G3 Fault Management and integration, User Manual

Page: 43 / 153

Reverting to Default Settings
Issue 2 April 1996 3-9
■
The Apply button in the lower left corner of the screen
■
The Options menu
2. Select Options
à
Save.
Result: Fault Management saves your changes in a resource file and uses
them in future startups (from any terminal and for every node).
Reverting to Default Settings
Fault Management has default settings for all of the options you can customize. If
you make changes to the Setup screen and then decide you want to return to the
default settings, you may do so easily by selecting Options
à
Defaults.
Exiting the Setup Screen
Use one of the following methods to exit the setup screen:
■
Click on the Close button at the lower right corner of the screen.
■
Select Options
à
Close.
NOTE:
If you close the screen without saving or applying, any changes you have
made will be lost.
For these default settings … Click here …
Colors and grey scale Table 3-2
Time intervals Table 3-5
Other setup options Table 3-7