background image

How to Display Reports

Issue  2   April 1996

8-7

Button Line for Output Options

The button line at the bottom of the screen allows you to complete the following 
commands. 

You can also select these commands from the Options menu.

How to Display Reports

You can display a standard report in the usual manner, by making a selection 
from the menu bar. You do not need to use the Output Options screen.

To use the Output Options screen to display a report that you created on the 
Report Builder screen:

1. Click on Apply.

2. Click on Run Report.

Result: the report displays on your screen.

How to Highlight Objects

To highlight Fault Management objects:

1. Click on Highlight Objects.

2. Click on Apply.

3. Did you open the Output Options screen from the Report Builder?

If yes, click on Run Report.

If no, you have completed this procedure.

How to Print Reports

To print a report:

1. Click on Output to Printer.

2. Do you want to change the print command? (The default is lpr.)

If yes, enter a new command in the Print Command field.

Button

Description

Apply

Generates the report based on the entries you 
make in the fields.

Close

Closes the Output Option screen without saving 
your entries.

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration


























































































































































Reviews: