Output Options Screen
Issue 2 April 1996
8-5
Table 8-3.
Field Entry Area
Field
Description
Output to
Screen
Sends the report to the screen. By default, this check box
is turned on.
Highlight
Objects
Highlights the following report objects:
■
Cabinet
■
Circuit pack
Output to Printer
Sends the report to the printer.
Print Command
The path and the command name that sends the output to
the printer.
■
Default = lpr
■
Maximum = 150 characters.
This field is required if you select Output to Printer.
Page Length
The number of lines in a printed page.
■
Default = 66 lines
■
Minimum = 15 lines
■
Maximum = 999
Output to File
Sends the report to a file.
If you select this field, then select
one
of the following
report formats:
■
ASCII (default) = Creates an ASCII file that you can
export to another application.
■
Formatted = Prints the report with the same character
and paragraph formats that you see on the screen.
File Name
The name of the report file, up to 150 characters. We
recommend that you enter the absolute path name.
This field is required if you select Output to File.
Summary of Contents for OneVision DEFINITY G3 Fault Management and integration
