AT&T MERLIN PIus, Installer'S Manual, Page: 37 / 57

Programming Routes
Follow these steps to enter new routes:
NOTE:
1
2
3
4
5
6
7
8
Dial *8.
If you make a mistake and want to reprogram a
particular route, enter *3 followed by the route
number (0 through 9) and then dial the pound
sign (#) eight times. This erases all programmed
extensions for the route entered.
Dial the route number (0 through 9). This is the
number callers enter when they want to be connected
to a particular department.
NOTE:
When programming route 0 for the
receptionist, use extension 10.
Dial the appropriate extension code:
11 = Day Primary Extension
21 =
Night Primary Extension
Dial 2 for a blind transfer.
Dial the extension number where the caller will be
connected.
Dial ####.
Continue programming or dial *## to exit authorized
caller mode.
Dial ## to disconnect.
2-14 Programming Features