background image

MERLIN MAIL—ML System Programming

3. [1] for System Parameters.

The System Parameters Menu plays.

4. [2] to specify port allocations.

The current port allocation plays, followed by the Port Allocation Menu.

5. Select one of the following options:

— [1] to allocate all ports to Automated Attendant Service

(AA—factory setting).

— [2] to allocate all ports to Call Answer Service (CA — use only

when your business does not want Automated Attendant
Service but wants outside callers to access Voice Mail Service
directly.)

— [3] to split allocation (2 ports AA, 2 ports CA).

The system plays the new port allocation, followed by the System

Parameters Menu.

Confirming No Delayed Answer

With No Delayed Answer (Immediate Answer), MERLIN MAIL—ML ports will
answer calls immediately (after one ring). With Delayed Answer, MERLIN
MAIL—ML ports will answer calls after four rings.

■ 

The factory setting is No Delayed Answer on all ports (Immediate

Answer ).

■ 

It is recommended that you do not change the factory setting.

■ 

MERLIN MAIL—ML Form A: System Parameters identifies the

planned setting.

Programming MERLIN MAIL—ML System Parameters

3 - 1 3

Summary of Contents for MERLIN MAIL

































































































































































































































Reviews:

Related manuals for MERLIN MAIL