Post-lmplementation
Unsupervised Transfer with
MERLIN MAIL—ML Coverage
1. Place an internal call to the MERLIN MAIL—ML system.
2. Do not answer the call.
3. When the MERLIN MAIL—ML system answers, press [*][T] (or [*][8] ) and
dial a mailbox number that has unsupervised transfer (Class of Service .
1-3 or 8-10).
4. One or both of the following responses should occur:
— If the telephone has an alternate telephone covering its calls,
the call should also ring at the alternate telephone.
— If the call is not answered, the call should be directed to the
MERLIN MAIL—ML system.
5. Perform this test for each extension that has Unsupervised Transfer assigned
and MERLIN MAIL—ML coverage.
Fax Call Handling
1 . Send a fax in on one of the incoming lines assigned to Automated
Attendant Service.
2. Make sure that the fax is received by the fax machine.
3. If a fax message-waiting indicator has been programmed, check that
it is lit.
5-10
Performing Acceptance Tests
Summary of Contents for MERLIN MAIL
Page 13: ...Contents GL Glossary GL 1 IN I n d e x IN 1 vi...
Page 64: ...MERLIN MAIL ML System Programming Figure 3 1 MERLIN MAIL ML System Programming Menus 3 2...
Page 151: ...MERLIN LEGEND System Programming Figure 4 3 Immediate Call Handling Call Handling Methods 4 15...
Page 161: ...MERLIN LEGEND System Programming Figure 4 4 Delayed Call Handling Call Handling Methods 4 25...