AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 690 / 887

Print Reports
4–318
Programming Procedures
Print Reports
Use the procedures in this section to change the language for system reports
and to print the system reports.
Report Language
Use this procedure to change the language of the system reports. It applies to
Release 1.1 and higher. Unless you change the report language, reports are
printed in the language chosen as the system language.
Summary: Report Language
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 1, System Planning
Factory Setting English
Valid Entries English, French, Spanish
Inspect No
Copy Option No
Console Procedure More
®
Language
®
Printer
®
English
or
French
or
Spanish
®
Enter
®
Exit
PC Procedure
u
®
6
®
4
®
1
or
2
or
3
®
0
®
5
Printing System Reports
The communications system can be used to print a variety of reports. You can
print individual reports or use the
All
option to print the entire set of available
reports, including all report sections and options. See Appendix F for samples of
the print reports.
Use this procedure to print the reports listed below. With the exception of Trunk
Information, the dash lists under the bullets show the sections of each report that
automatically print when the report option is selected.
■
All
Each report
All report options
■
System Set Up
■
System Dial Plan