AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 67 / 887

Product Enhancements
Programming Basics
1–51
■
The Call Type field and the Called Number field on the SMDR report have
been changed for both the Basic and ISDN report formats.
■
An 012 port that is programmed as a generic voice messaging interface
(VMI) port can transfer an outside call to an outside number.
■
In a system where the transfer audible option is programmed for Music
On Hold and a music source is provided, outside callers who are
transferred to a calling group and are waiting in the queue or who are
parked or camped-on, hear music while they are waiting. Internal callers
never hear music on hold while waiting in the calling group queue or when
they are parked, camped-on, or being transferred to another extension.
Installation and Hardware
Installation and hardware enhancements include the following:
■
The control unit covers for the MERLIN LEGEND Communications System
are the same easy-to-use covers as those for the MERLIN II
Communications System.
■
A new 012 (T/R) module [apparatus code 517G13 (28) or higher letter]
contains a built-in ring generator. The maximum ring equivalency number
(REN) supported is 2.2, and the module will ring four ports at one time.
Bridging of single-line telephones is not supported due to poor
transmission quality.
■
A new 008 OPT module (labeled “with RING GEN.”) contains a built-in
ring generator. It rings four ports at a time.
■
Ferrite cores for the power supply modules are shipped from the factory
to comply with FCC Part 15 requirements.
■
3129-WTWA (touch-tone outdoor telephone equipped with cast aluminum
housing and armored handset cord with bell ringers)
■
3129-WRWA (rotary-dial outdoor telephone equipped with cast aluminum
housing and armored handset cord with bell ringers)