AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 649 / 887

Remote Access Features
Programming Procedures
4–277
Console Display/Instructions Additional Information PC
3 Erase the current code (
nnnn
).
BarrierCode xxx:
xx = barrier code ID number entered in
Enter yy digits (0-9
,
*)
Step 1
code
yy = barrier code length
nnnn
Backspace Next
Exit Enter
Press Drop .
A+p
4 Enter a code of up to 11 digits [
N
= any combination of 0 to 9 and an asterisk (*)].
Dial or type [ N ].
Û
5 Continue to assign the code to another barrier code ID number or go to
Step 6.
Select
Next Next
.
9
Return to Step 3. The next barrier code number
will be displayed on Line 1.
6 Save your entry.
Select
Enter Enter
.
0
7 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Remote Access with Barrier Codes
Use this procedure to change the class of restriction for individual remote
access barrier codes. The class of restriction assigned to each barrier code
allows or denies the use of the following system features:
■
Restriction. Determines whether remote access users can make local
and/or toll calls, and includes the following settings:
Unrestricted
Toll restricted
Outward restricted
■
ARS Facility Restriction Level (Hybrid/PBX only). Allows or restricts use
of outgoing trunks by assigning a facility restriction level (FRL) from 0
through 6. The FRL ranges from 0 (most restrictive) to 6 (least restrictive).
The FRL value assigned here is the opposite of the FRL value assigned to
the ARS route, where a value of 0 is the least restrictive, and a value of 6
is the most restrictive.
■
Allowed Lists Assignment. Assigns Allowed Lists and is used when
remote access users are restricted from making local or toll calls.
■
Disallowed Lists Assignment. Assigns Disallowed Lists and is used when
remote access users are not restricted from making local or toll calls.