AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 613 / 887

Optional Group Calling Features
Programming Procedures
4–241
Summary: Group Calling Overflow and
Thresholds
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 7d, Group Calling
Factory Setting Overflow coverage: none
Threshold: 1 call
Timeout: 0 sec
Valid Entries Overflow coverage: Backup extension number
Threshold: 1 to 99 calls
Timeout: 0 to 900 seconds
Inspect No
Copy Option No
Console Procedure
Extensions
®
More
®
Grp Calling
®
Overflow
®
Dial
calling group ext. no.
®
Enter
®
Dial ext. no.
®
Enter
®
Number Based Overflow
®
Drop
®
Dial no. of calls
®
Enter
®
Time Based Overflow
®
Drop
®
Dial no. of seconds
®
Enter
®
Exit
®
Exit
PC Procedure
6
®
u
®
4
®
8
®
Type calling group ext. no.
®
0
®
Type backup ext. no.
®
0
®
1
®
A
+
P
®
Type no.
of call
®
0
®
2
®
A
+
P
®
Type no. of seconds
®
0
®
5
®
5
Group Calling Message-Waiting Indicator
Use this procedure to designate the extension that will receive message-waiting
indications (MWIs) for the calling group.
Only one extension can be designated as a message-waiting receiver for each
calling group; however, more than one calling group can use the same
message-waiting receiver. The extension assigned as a message-waiting
receiver does not have to be a member of the calling group.
Message-waiting indications cannot be sent to the extension assigned to the
group unless this option is programmed. The message-waiting receiver cannot
distinguish between messages left for the calling group and personal messages.