AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 559 / 887

BRI Facilities
Programming Procedures
4–187
Console Display/Instructions Additional Information PC
6 Erase the current SPID.
Line number xxx:
xxx = line number selected in Step x.
Enter SPID
xxxxxxxxxxxxxxxxxxxx
Backspace
Exit
Enter
Press Drop .
A
+
p
7 Enter the new SPID.
Dial or type [
xxxxxxxxxxxxxxxxxxxx
].
Û
8 Save your entry.
Select
Enter Enter
.
0
9 Erase the current DN.
Line xxx:
xxx
= line number selected in Step x.
Enter DN
xxxxxxxxxx
Backspace Next
Exit Enter
Press Drop .
A
+
p
10 Enter the new DN.
Dial or type [ xxxxxxxxxx ].
Û
11 Save your entry.
Select
Enter Enter
.
0
12 Return to the System Programming menu.
Select
Exit Exit
three times.
555
Timers
Use this procedure to set timer thresholds.
!
CAUTION:
The factory settings for these thresholds are standard and rarely need to
be changed. If you are not sure of the correct timer and threshold settings
for your BRI lines and trunks, check with your AT&T representative before
you make a change. Incorrect settings can cause your BRI lines and
trunks to malfunction.
If the network does not respond before the programmed time, the system takes
the appropriate corrective action.