AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 333 / 887

Night Service
Common Administrative Procedures
3–197
Console Display/Instructions Additional Information PC
13 Select Exclusion List.
Night Service:
Make a selection
GroupAssign
Start
OutRestrict Stop
Emergency Time Control
_
ExcludeList
Exit
4
14 Specify the extension.
Night Serv Exclusion:
If no DSS is attached :
Enter extensions
SP: “Entering an Extension”
Û
excluded
If DSS is attached :
Delete
Toggle the red LED on or
Backspace
off as required. Then, go to Step 16.
Exit Enter
On = extension is excluded from list.
Off = extension is not excluded from list.
15 Assign or remove the extension(s) from the exclusion list.
Select
Enter Enter
or
0
Delete Delete
.
8
Continue to add or delete extensions by
repeating Steps 14 and 15.
16 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Night Service with Time Set
Use this procedure to specify the time of day and the days of the week when
Night Service is to be activated and deactivated.
Enter the time of day as 4 digits, using 24-hour notation. Enter the day of the
week as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid
number, the system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually.
This feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).