AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 326 / 887

Night Service
3–190
Common Administrative Procedures
Night Service
The procedures in this section cover how to program the following optional Night
Service features:
■
Night Service Group Assignment
■
Night Service with Outward Restriction
■
Night Service with Time Set
Night Service Group Assignment
Use this procedure to assign extensions and calling groups to a Night Service
group for coverage after hours.
A maximum of eight Night Service groups can be assigned (no more than one
for each operator position assigned). Any number of extensions can be
assigned to a Night Service group, and an extension can belong to more than
one group.
A calling group can also be assigned to a Night Service group. This applies only
to Release 2.0 or later.
Summary: Night Service Group Assignment
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 9a, Night Service: Group Assignment
Factory Setting Not applicable
Valid Entries Not applicable
Inspect Yes (extensions only)
Copy Option No
Console Procedure To assign a calling group to a Night Service group:
NightSrvce
®
GroupAssign
®
Calling Group
®
Dial ext. no.
of Night Service attendant
®
Enter
®
Dial calling group no.
®
Enter
®
Exit
®
Exit
To assign an extension to a Night Service group:
NightSrvce
®
GroupAssign
®
Extensions
®
Dial ext. no. of
Night Service attendant
®
Enter
®
Dial ext. no. of
telephone
®
Enter
®
Exit
®
Exit