manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 74 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 74

Features

Before you begin programming, remove the clear plastic that
covers the button labeling card and write in the names of the
features next to the buttons to be programmed. Replace
cover with textured side up.

Some features require you to respond to display prompts with
additional entries. For example, Auto Dial requires you to dial

a telephone number. Whenever you respond to a display

prompt, you need to select 

Enter 

to confirm your entry or

selection.

If you are unable to program your console, someone may be
programming the system. See your system manager.

To Program Features By Using the

Display

1.
2.

3.

4.
5.
6.
7.

Label button to be programmed with the feature name.
Press Menu.
Select 

Ext Program [Prog] 

to begin programming.

On MLX-28D consoles, press More, then press Prog.

Select 

Start.

Press the button you labeled.

Select 

ListFeature [List] 

.

Press the button next to or below feature you want to
program.

If this feature is not displayed, press More, or select

FindFeature [Find] 

and select a letter range with first letter of

feature you want to program.

4-6

Using Features

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments