manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Operator'S Manual, Page: 40 / 152

Share
Download
AT&T Merlin Legend MLX-20L Operator'S Manual Download Page 40

About Your Direct-Line Console

NOTE:

If your company subscribes to AT&T’s INFO2

automatic number identification (ANI) service, the
caller’s telephone number is shown for outside
calls. The availability of the caller identification
information may be limited by local-serving
(caller’s) jurisdiction, availability, or central office

equipment.

■ 

When you are placing a call, the display shows the

dialed digits and the extension number or extension
alphanumeric label.

■ 

To see who transferred a call to you, press  More.

When you are using a feature, Line 1 shows the feature

name and may prompt you to enter information.

If the “greater than” ( >) symbol is shown, press More to see

additional features or information.

.

Line 2 shows the date and time and reminds you of held and

waiting calls.

Lines 3 through 7 show Personal Directory listings. Personal
Directory is a feature available on the MLX-20L telephone

only. For more information on directories, see the MLX- 10D,

MLX-28D, and MLX-20L Display Telephones Users Guide.

1-28 

Console Display

Summary of Contents for Merlin Legend MLX-20L

























































































































































Reviews:

No comments