manualshive.com logo in svg

AT&T Merlin II Feature Module 2, System Manual

The AT&T Merlin II Feature Module 2 System Manual is available for free download at manualshive.com. This comprehensive manual provides detailed instructions and information on how to maximize the features and functionality of the Merlin II Feature Module 2. Get your manual now and unlock the potential of your AT&T Merlin II system.

Share
Download
background image

Each CMS line group should be assigned to a separate line pool in order to
prevent people not working with CMS from placing or receiving calls on
those lines. CMS lines should  not  be placed in the same line pool as lines not

assigned to CMS.

All CMS lines and line pools on an agent’s voice terminal should be set to No
Ring. (See “Ringing Options” later in this section.) Intercom calls and calls
transferred to the agent’s voice terminal by CMS or another agent will still
ring.

Square System

If your system is set for square operation, each line that you assign to an
agent’s voice terminal appears on a separate button. Any lines an agent is
responsible for  must  appear on the agent’s voice terminal so that the agent
can receive incoming or transferred calls on those lines.

All CMS lines and line pools on an agent’s voice terminal should be set for
No Ring. (See “Ringing Options” later in this section.) Intercom calls and
calls transferred by CMS or other agents still ring at the agent’s voice
terminal.

A NOTE ON GHOST VOICE   

In order for agents to use the All-Ring operation or Transfer-to-Split feature,

TERMINALS

either you, as the CMS supervisor, or the MERLIN II system administrator
must assign a “ghost” voice terminal for each split that needs to use these
features. The “ghost” voice terminal should be assigned a valid and unused
2-digit intercom number. However, you  do not need to connect a voice
terminal to the voice terminal jack. Your MERLIN II system administrator
must also assign the proper CMS lines and line pools to the “ghost” voice
terminals and program those lines and line pools for No Ring. Agents who
need to use either the All-Ring operation or Transfer-to-Split feature must
have on their voice terminals a Cover button programmed for the “ghost”
voice terminal.

MANUAL SIGNALING AND

If a problem occurs, the agent may need to contact you for help. The agent

AUTO INTERCOM

can have  either  a Manual Signaling  or an Auto Intercom button for that

BUTTONS

purpose. An agent may also want to have an Auto Intercom button for a co-
worker in the MERLIN II system or for another split.

NOTE: 

An agent  cannot  have  both  a Manual Signaling and an Auto

Intercom button for the same person.

Auto Intercom Buttons

An auto intercom button allows a person to touch a programmed button to
call someone within the MERLIN II system. An agent will probably need two
types of Auto Intercom buttons:

●   

An Auto Intercom button for the supervisor or a co-worker. 

An agent

can contact you or another co-worker with a Manual Signaling or an Auto
Intercom button. When the agent needs to call someone in the MERLIN II
system, he or she can just touch that person’s Auto Intercom button. (See
the note below.) If the agent has a call in progress, he or she can put the
current call on hold and touch the Auto Intercom button for the person he
or she wants to call.

6-6 Selecting a Voice Terminal for Your Agents

Summary of Contents for Merlin II Feature Module 2

































































































































































































































Reviews:

No comments

Related manuals for Merlin II Feature Module 2

Panasonic KX-A406 Quick Start Manual preview
KX-A406
Brand: Panasonic Pages: 24
Magnavox FW391C Instructions Manual preview
FW391C
Brand: Magnavox Pages: 26
Hansen P4 Service Manual preview
P4
Brand: Hansen Pages: 36
Aastra Telephone Quick Reference Manual preview
Telephone
Brand: Aastra Pages: 2
Aastra POWERTOUCH 390 Specifications preview
POWERTOUCH 390
Brand: Aastra Pages: 2
Aastra Meridian 9216 Specifications preview
Meridian 9216
Brand: Aastra Pages: 2
Aastra Meridian 9116 Specifications preview
Meridian 9116
Brand: Aastra Pages: 2
Aastra Dialog 4106 Basic Quick Reference Manual preview
Dialog 4106 Basic
Brand: Aastra Pages: 2
EastLink Telephone Customer Manual preview
Telephone
Brand: EastLink Pages: 28
Aastra 9617 Online User'S Manual preview
9617
Brand: Aastra Pages: 461
Aastra 9120 User Manual preview
9120
Brand: Aastra Pages: 40
Aastra SIP-DECT Installation, Administration And Maintenance Manual preview
SIP-DECT
Brand: Aastra Pages: 47
Aastra SIP-DECT Installation And Administration Manual preview
SIP-DECT
Brand: Aastra Pages: 47
abc SG2 Operation And Maintenance Manual preview
SG2
Brand: abc Pages: 8
Yeastar Technology N1 Installation Manual preview
N1
Brand: Yeastar Technology Pages: 9
Qtx V-SERIES User Manual preview
V-SERIES
Brand: Qtx Pages: 6
Panasonic KX-TG7622B Service Manual preview
KX-TG7622B
Brand: Panasonic Pages: 98
AT&T TL96271 Quick Start Manual preview
TL96271
Brand: AT&T Pages: 26

Brands by name

Popular brands

Load more brands